|
|
|
Use this tool to learn about websites, specifically the one you just entered.
If you find some aspect of it inappropriate it is not our fault.
If you are the owner of this website: yes we are a real search engine, we do have a real web crawler called FyberSpider and you can block it if you feel the urge.
We are in the process of updating this tool. Until we are done just use our search results to check the inclusion status of your site.
Submit your site to major search engines within 48 hours.
Find out if your site has been cataloged by top search engines for only $8.99.
Below you will see site info taken directly from the URL you entered in real time. This is also known as our URL Breakdown tool and can be used independently of our site info tool.
Unreinforced Polypropylene Engineering Specifications
This is just a sample of the content found on this website. Please visit the website to read the entire page.
"Unreinforced
Polypropylene Engineering Specifications
1 SCOPE:
1.1 The work contained
in these specifications consists of furnishing and installing Unreinforced
Polypropylene lining as shown on the drawings or directed by the project
engineer. All work shall be done in strict accordance with the drawings
and these specifications and subject to the terms and conditions of the
contract. It is intent of these specifications to ensure that a first quality
finished product is provided.
2 SUBMITTALS:
2.1 At bid time the contractor
must submit the qualifications as per section 5.
2.2 Submittals for the
fabrication and installation of the Polypropylene lining material will
be provided after the award of the contract. Factory fabrication shall
not proceed until the submittals have been approved by the project engineer.
2.3 All certification
and test results required in sections 6, 7 and 9 shall be submitted after
completion of the Polypropylene installation.
3 DESCRIPTION OF
MATERIALS:
3.1 Polypropylene lining
shall consist of 62 inch minimum widths of manufactured Polypropylene sheeting
fabricated into large panels by means of special factory bonded seams.
3.2 The Polypropylene
must have been satisfactorily demonstrated by prior use to be suitable
and durable for such purposes. The materials supplied under these specifications
shall be first quality products manufactured specifically for the purposes
of this work.
4 PHYSICAL CHARACTERISTICS:
4.1 Polypropylene sheeting
shall be manufactured from a composition of high quality ingredients suitably
compounded for use in hydraulic structures. Reprocessed or reground materials
shall not be used.
4.2 The Polypropylene
membrane shall consist of thoroughly mixed Polypropylene compound. It shall
be manufactured by the calendering process and shall be uniform in color,
thickness, size and surface texture.
4.3 The sheeting shall
contain no undispersed materials, divots, deep"
....
read entire page
|
Links to Pages on the Same Domain Name
|
|
