|
|
|
Use this tool to learn about websites, specifically the one you just entered.
If you find some aspect of it inappropriate it is not our fault.
If you are the owner of this website: yes we are a real search engine, we do have a real web crawler called FyberSpider and you can block it if you feel the urge.
We are in the process of updating this tool. Until we are done just use our search results to check the inclusion status of your site.
Submit your site to major search engines within 48 hours.
Find out if your site has been cataloged by top search engines for only $8.99.
Below you will see site info taken directly from the URL you entered in real time. This is also known as our URL Breakdown tool and can be used independently of our site info tool.
Garrett Metal Detector
This is just a sample of the content found on this website. Please visit the website to read the entire page.
"A&S Company Order Line (408)248-1233 We Ship Nationwide
OPERATING INSTRUCTIONS:
GTI 2500
ASSEMBLY INSTRUCTIONS:
1. Compress the button ends of the spring clip and insert, button end first, into the lower stem of the detector so that the button ends pop out of the holes. The spring clip is installed at the factory in the upper metal stem. This will enable the stem assembly to be attached to the electronic housing and the over all length of the detector adjusted for a comfortable operating length.
2. Attach the lower stem to the searchcoil by inserting the two rubber washers into the stem and slipping the searchcoil onto the stem. Insert the threaded bolt through the holes and hand-tighten the two knobs.
3. Install the upper stem to the lower and then this assembly to the detector housing by depressing the buttons and coupling the stem to the housing. Adjust for the most comfortable operating length.
4. Wrap the searchcoil cable snugly about the stem with the first turn of the cable over the stem.
5. Insert the cable connector into the connector on the detector housing and hand-tighten securely.
CONTROL FUNCTIONS
Touchpads:
Familiarize yourself with the touchpad controls. Their basic functions are given here. How they can help you find treasure is explained in the Operating Instructions of this Manual.
Power/ Hold to reset:
. Turns the detector on;
. Turns the detector off;
. Returns the detector to factory settings.
Raise searchcoil approximately one foot above the ground. Press the touchpad once, and the detector begins operating. Each time the detector is turned on, the battery condition is reported on the detector's LCD Display and the detector automatically begins operating in the Discriminate Coins mode.
Press once again to turn the detector off. Special memory circuitry will retain all settings made. Also, the detector will switch itself off automatically when no touchpad is pushed and no target is "
....
read entire page
|
Links to Pages on the Same Domain Name
|
|
